一、在ansible安装完毕后一般需要以SSH的方式连接到需要进行管理的目标主机,一开始遇到了如下问题:

192.168.15.4 | UNREACHABLE! => {

“changed”: false, 

“msg”: “Failed to connect to the host via ssh: Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).rn”, 

“unreachable”: true

}

192.168.15.55 | UNREACHABLE! => {

“changed”: false, 

“msg”: “Failed to connect to the host via ssh: Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).rn”, 

“unreachable”: true

原因分析:

没有在ansible管理节点(即安装ansible的节点)上添加目标节点(即需要管理的节点)的ssh认证信息。

解决步骤:

1:管理节点生成SSH-KEY

#ssh-keygen

成功后在~/.ssh/路径下将生成ssh密钥文件:id_rsa及id_rsa.pub

2:添加目标节点的SSH认证信息

#ssh-copy-id root@目标节点IP

这里root是在目标节点上登录的用户,@符号后面接目标节点IP即可,之后会提示输入目标节点root用户密码,输入即可。

添加认证信息后,目标节点主机的~/.ssh/目录下将会出现一个authorized_keys文件,里面包含了ansible管理节点的公钥信息,可以检查一下是否存在。

3:在确定目标主机的SSH认证信息都已正确添加且目标主机的~/.ssh/目录都存在管理节点的公钥信息后,再执行之前出错的ansible ping指令:

#ansible -m ping all

192.168.15.4 | SUCCES对之前未连接的主机进行连结时报错如下:S => {

“changed”: false, 

“ping”: “pong”

}

192.168.15.55 | SUCCESS => {

“changed”: false, 

“ping”: “pong”

}

二、对之前未连接的主机进行连结时报错如下:

[root@puppet ~]# ansible webservers -m command -a ‘ls ~’ -k

SSH password: 

192.168.15.10 | FAILED | rc=0 >>

Using a SSH password instead of a key is not possible because Host Key checking is enabled and sshpass does not support this.  Please add this host’s fingerprint to your known_hosts file to manage this host.

解决步骤:

修改ansible.cfg文件

vi /etc/ansible/ansible.cfg

找到以下行,让host_key_checking=False这行生效

# uncomment this to disable SSH key host checking

host_key_checking = False

三、ansible requires a json module, none found!

SSH password:192.168.15.123 | FAILED >> {   “failed”: true,   “msg”: “Error: ansible requires a json module, nonefound!”,   “parsed”: false}

解决步骤:

python版本过低,要不升级python要不就升级安装python-simplejson。yum install -y python-simplejson

四、第一次系统初始化运行生成本机ansible用户key时报错

failed: [127.0.0.1] =>{“checksum”: “f5f2f20fc0774be961fffb951a50023e31abe920″,”failed”: true}msg: Aborting, target uses selinux but pythonbindings (libselinux-python) aren’t installed!FATAL: all hosts have already failed –aborting

解放步骤:

yum install libselinux-python -y

五、使用命令报错

·····Traceback (most recent call last):  File “/usr/bin/ansible”, line 197, in     (runner, results) = cli.run(options, args)  File “/usr/bin/ansible”, line 163, in run    extra_vars=extra_vars,  File “/usr/lib/python2.6/site-packages/ansible/runner/__init__.py”, line 233, in __init__    cmd = subprocess.Popen([‘ssh’,’-o’,’ControlPersist’], stdout=subprocess.PIPE, stderr=subprocess.PIPE)  File “/usr/lib64/python2.6/subprocess.py”, line 639, in __init__    errread, errwrite)  File “/usr/lib64/python2.6/subprocess.py”, line 1228, in _execute_child    raise child_exceptionOSError: [Errno 2] No such file or directory

解决步骤:

yum install openssh-clients


原文地址

HP服务器集成 iLO 端口的配置

(出处: 乐维_一站式运维监控管理平台)

文章来源于互联网,如有雷同请联系站长删除:【Ansible】Ansible 连接主机显示报错的处理方案

发表评论